English German
 

 
Power Supply
Raid Module
Card Reader
 
Zippy P1S-5180V 1U Single
Peripheral > Power Supply > Zippy > P1S-5180V


P1S-5180V
  • Output Wattage: 180W
  • Best Solution for: Server, Work Station, Storage System
  • Dimension:
    150.00 x 82.00 x 40.50 (mm)
    5.91x 3.23 x 1.59 (inch)
AC INPUT SPECIFICATION
 
  • VOLTAGE: 90 ~ 264VAC FULL RANGE
  • FREQUENCY : 47 ~ 63 HZ
  • INPUT CURRENT: 2.0 A ( RMS ) FOR 115VAC 1.0 A ( RMS ) FOR 230VAC
  • INRUSH CURRENT: 35A MAX. FOR 115 VAC 70A MAX. FOR 230 VAC

    		•
    DC INPUT SPECIFICATION
    OUTPUT VOLTAGE
    OUTPUT CURRENT
    REGULATION
    OUTPUT
    MIN.(A)
    MAX.(A)
    LOAD
    LINE
    RIPPLE & NOISE
    MAX.[P-P]
    +5V
    0
    14
    ± 5%
    ± 1%
    50mV
    +12V
    0.3
    14
    ± 3%
    ± 1%
    120mV
    -12V
    0
    0.30
    ± 10%
    ± 1%
    150mV
    +3.3V
    0
    12
    ± 5%
    ± 1%
    50mV
    +5VSB
    0
    2.5
    ± 5%
    ± 1%
    50mV
    -5V
    0
    0.3
    ± 5%
    ± 1%
    100mV
    Remarks:
    * -5V IS OPTION AND WE DID NOT PUT -5V IN OUR STANDARD MODEL
    * +5V AND +3.3V TOTAL OUTPUT MAX: 70W
    * +5V, +3.3V, +12V, -12V TOTAL OUTPUT MAX: 168W
    * TOTAL POWER: 180W

     
    • TEMPERATURE RANGE：OPERATING 0℃～50℃, STORAGE -20~80℃
    • HOLD UP TIME：34mS MINIMUM AT 115V FULL LOAD
    • DIELECTRIC WITHSTAND：INPUT/OUTPUT 1800 VAC FOR 1 SECOND INPUT TO FRAME GROUND 1800 VAC FOR 1 SECOND
    • EFFICIENCY：78~82% AT 230VIN AND LOAD CONDITION: 12V/9.92A; 5V/6.33A; 3.3V/5.43A; -12V/0.21V; 5VSB/1.77A
    • POWER GOOD SIGNAL：ON DELAY 100mS TO 550mS，OFF DELAY 1mS
    • OVER POWER PROTECTION：110～160% MAX
    • OVER VOLTAGE PROTECTION: +3.3V→3.6~4.3V, +5V→5.6~6.5V, +12V→13.2~15V
    • SHORT CIRCUIT PROTECTION: +5V, +3.3V, +12V, -12V; AUTO-RECOVERED: +5VSB
    • SAFETY : TO MEET UL, CUL, TUV, CCC
    • REMOTE ON/OFF CONTROL
      • THE POWER SUPPLY SHALL ACCEPT A LOGIC OPEN COLLECTOR LEVEL WHICH WILL DISABLE/ENABLE ALL THE OUTPUT VOLTAGE (EXCLUDE +5V STAND BY). AS LOGIC LEVEL IS LOW，OUTPUTS VOLTAGE WERE ENABLE， AS LOGIC LEVEL IS HIGH，OUTPUTS VOLTAGE WERE DISABLE.
    • MEET IEC-1000-3-2 CLASS D
    • *THE POWER-SUPPLY IS FOR CHASSIS-ASSEMBLY ONLY AND IS NOT ALLOWED TO BE OPERATED AS STAND-ALONE COMPONENT. FINAL ASSEMBLY HAS TO COMPLY WITH CORRESPONDING EMC- AND SAFETY-REGULATIONS.